Megamortar Binding Additive & Primer
– Megamortar Binding Additive and Primer is a modified latex polymer designed for general
purpose use as an additive in conjunction with cement based adhesives and cement based mortar
to enhance bond strengths, water resistance and chemical resistance.
-Megamortar Binding Additive and Primers main uses are: Primer prior to tiling or plastering,
Slurry bonding coat, Plastisiser for mortars, Reducing efflorescence, Adhesion enhancer in
conjunction with cement based tile adhesives for: Vitrified tiles, Glass mosaics, Swimming
pools, Industrial and commercial floors, Dense smooth substrates.
-Megamortar Binding Additive and Primer will improve the flexural strength of a cement based
adhesive, providing greater resistance to the stresses in installations where the tiling may be
subject to limited movement.
-In all instances the surface needs to be well fixed and clean and free from any contamination.
-Special note should be taken of the fixing and sealing requirements of the substrate supplier.
-Where waterproofing is required use The Flexi-Seal licensed Waterproofing System.
-Existing paint work must be clean and firmly adhered. Roughen up the paint with sandpaper to
provide some suction back into the substrate.
– Megamortar Binding Additive and Primer can be used in three ways:
-As a primer, to reduce porosity of the substrate and to provide a separating layer.
– As a bonding coat or slurry, immediately prior to application of a tile adhesive or sand cement
mortar to provide exceptional adhesion to the substrate.
-As an additive, to the cement mix. Megamortar Binding Additive and Primer can be added as a
partial or complete replacement of the gauging water. Amongst the advantages conferred by the
inclusion of Megamortar Binding Additive and Primer is improved workability, improved
adhesion, improved toughness and flexibility, reduced dusting, improved resistance to chemicals,
improved water and frost resistance, reduced salts migration (efflorescence).
-Excessive Megamortar Binding Additive and Primer, tools and other equipment can be cleaned
up using water while the additive is still wet.
– As a primer 12m2/L
– As a slurry mix with cement 3m2/L
-As a additive to cement based tile adhesive 2-3m2/L
Packaging/ Shelf Life:
-Megamortar Binding Additive and Primer is available in : 4 L and 20 L
– A pail of Megamortar Binding Additive and Primer, when stored in a cool, dry environment, and
is stored above ground level, will have a shelf life of approximately 12 months.
– For applications & situations not mentioned in this data sheet please contact Flexco (NZ) Ltd
– Megamortar Binding Additive and Primer is classified as a non-hazardous product.
– For a full MSDS on this product please contact Flexco (NZ) Ltd
HOUSEPLAN NON SLIP-ready mixed thin-bed ceramic tile adhesive-Technical Data Sheet. HOUSEPLAN NON SLIP is anMegamortar Binding Additive and Primer -modified latex polymer
Megamortar Binding Additive & PrimerCharacteristics:– Megamortar Binding Additive and Primer is a modified latex polymerDeltaflex Ceramic Tile Adhesive-multipurpose, heavily polymer modified adhesive
Deltaflex Ceramic Tile AdhesiveCharacteristics: Deltaflex is a multipurpose, heavily polymer modified thin or thick bedTilebond White Ceramic Tile Adhesive
Tilebond White Ceramic Tile AdhesiveCharacteristics: Tilebond White is a lightly modified thin bed adhesive designed